Scan code:
LN99366
Manufacturer code:
JD-M238
MXR ISO Power Supply
MXR M238 ISO Power Supply,Pedalboard-Friendly With Ten Fully Isolated Outputs Ranging From 9V to 18V
Scan code:
LN99366
Manufacturer code:
JD-M238
Free Delivery
spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
- By DPD On 17th Dec To 19th Dec to your specified address. | Free Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout
- Collect instore Collect from our Bolton store, BL6 6PE | Free
- UPS and DPD Pickup Pickup from local convenience store | £4.79
- SCANPROTECT Protect against installation damage for 28 days. More info
Product Overview
The Iso-Brick Power Supply is small and light with tons of quiet, noise-free DC power on tap ready to run a wide range of pedal types without crowding or weighing down your pedalboard.
Each of the Iso-Brick Power Supply's 10 outputs is fully isolated, eliminating gig-ending ground loop noise. Whether analog or digital, positive or negative ground, this power box has you covered.
The MXR team broke down these 10 outputs to accommodate a variety of voltage and current requirements:
Two 9V outputs at 100mA, two 9V outputs at 300mA, two 9V outputs at 450mA, two 18V outputs at 250mA, and two variable outputs adjustable from 6V to 15V at 250mA.
The two variable outputs can be used to emulate voltage drained battery effect sought by many vintage tonechasers.
On top of all that, the Iso-Brick Power Supply comes in a small, lightweight housing that's built like a tank. Features power on/off and connection status LEDs. Put this little box on your pedalboard to make sure it runs reliably and quietly gig after gig.
Features • 10 fully isolated outputs
• Quiet, noise-free operation
• Powers a wide range of pedal types—digital and analog, positive and negative ground
• Variable outputs can be used to emulate drained battery effect
• Input: 18V @ 2 Amps regulated supply (positive barrel negative center 5.5mm x 2.1mm plug)
• Outputs: 6-15V @ 250mA (2), 18V @ 250mA (2), 9V @ 450mA (2), 9V @ 300mA (2), 9V @ 100mA (2)
(all positive barrel negative center5.5mm x 2.1mm
Each of the Iso-Brick Power Supply's 10 outputs is fully isolated, eliminating gig-ending ground loop noise. Whether analog or digital, positive or negative ground, this power box has you covered.
The MXR team broke down these 10 outputs to accommodate a variety of voltage and current requirements:
Two 9V outputs at 100mA, two 9V outputs at 300mA, two 9V outputs at 450mA, two 18V outputs at 250mA, and two variable outputs adjustable from 6V to 15V at 250mA.
The two variable outputs can be used to emulate voltage drained battery effect sought by many vintage tonechasers.
On top of all that, the Iso-Brick Power Supply comes in a small, lightweight housing that's built like a tank. Features power on/off and connection status LEDs. Put this little box on your pedalboard to make sure it runs reliably and quietly gig after gig.
Features • 10 fully isolated outputs
• Quiet, noise-free operation
• Powers a wide range of pedal types—digital and analog, positive and negative ground
• Variable outputs can be used to emulate drained battery effect
• Input: 18V @ 2 Amps regulated supply (positive barrel negative center 5.5mm x 2.1mm plug)
• Outputs: 6-15V @ 250mA (2), 18V @ 250mA (2), 9V @ 450mA (2), 9V @ 300mA (2), 9V @ 100mA (2)
(all positive barrel negative center5.5mm x 2.1mm
MXR ISO Power Supply
![MXR ISO Power Supply]()