Scan code:
LN64787
Manufacturer code:
Pi-101
Lycom Pi-101 Raspberry Pi USB to SATA Converter Board
Lycom Pi-101 USB 2.0 to SATA Converter Board, USB Micro-B/USB 5-pin Header, SATA I/II/III, for RaspberryPi Computer
Scan code:
LN64787
Manufacturer code:
Pi-101
End Of Life
This product is no longer available to purchase
Delivery Options
- By DPD to your specified address. | £5.48 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout
- Collect instore Collect from our Bolton store, BL6 6PE | Free
- UPS and DPD Pickup Pickup from local convenience store | £4.79
Product Overview
Easy to install and allows you to utilize any type of SATA device to your Raspberry Pi. Features
• Connect Raspberry Pi USB to SATA device
• Supports any type of SATA Device (SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
• Supports SATA III, SATA II and SATA I drive
• Compliant with Serial ATA Specification Revision 2.6
• Supports Serial ATA transfer rate of 6.0 Gbps
• Supports ATA/ATAPI Packet Command Set
• Supports ATA/ATAPI LBA 48 Addressing mode
• Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
• Compliant with Open Host Controller Interface Specification for USB Rev 1.0a
• Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95
• Both USB micro-B connector and USB 5Pin Pinheader on board for Pi connection
• Fully RoHS compliant
• Supports any type of SATA Device (SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
• Supports SATA III, SATA II and SATA I drive
• Compliant with Serial ATA Specification Revision 2.6
• Supports Serial ATA transfer rate of 6.0 Gbps
• Supports ATA/ATAPI Packet Command Set
• Supports ATA/ATAPI LBA 48 Addressing mode
• Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
• Compliant with Open Host Controller Interface Specification for USB Rev 1.0a
• Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95
• Both USB micro-B connector and USB 5Pin Pinheader on board for Pi connection
• Fully RoHS compliant