Buy Now, Pay Later with a 10% deposit. Or spread the cost of your finance over 24-48 months.
By DPD On 5th Dec 2016
DPDDelivered to your specified address. Receive SMS with one-hour delivery window.£4.79
Collect from local shops
UPS and DPD PickupCollect your parcel from your newsagents, petrol stations and convenience stores.Free
Q-CollectPlace your order online and collect from our Bolton store with Q-Collect.
Weekend, timed and European delivery options are available at checkout
Scansure protectionScansureProtect against installation damage for 28 days.More
4Ports 6Gbps AHCI SATA III PCIe 2.0 host board to support HybridDrives, Hardware Raid0, Raid1, NCQ & Port Multiplier!
When configured with one HDD and one mSATA SSD in HybridDrives mode, it automatically migrate hot data to the SSD, while enabling all data to be safely stored on a larger capacity HDD Features
• RAID 6Gbps SATA III 4Ports PCIe Gen2 x2 electrical and x4 physical Host Adapter • 2Ports 52Pin mSATA and 2Ports 7Pin SATA on board • Supports PCIe 1.0 and PCIe 2.0 motherboard • Compliant with 10Gbps PCI Express 2.0 • Fully compliant with Serial ATA specifications 3.0 • Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps • Supports SATA I & SATA II & SATA III drive and mSATA SSD • Supports Native Command Queuing (NCQ) • Supports totally max 7 drives and mSATA SSD connected • Supports max one SATA FIS-based or Command-based Port Multiplier and max 4 drives connected to PM • Pin header on board for drive LED connection • Latch mSATA connector on board, no need the screw for the retention of mSATA SSD • Low Profile PCIe Form Factor • Regular size PCIe bracket on board and Low Profile bracket included • Require an empty PCIe x4 or x8 or x16 slot in computer • Supports 64bit / 32bit Win8, Win7, Vista, 2008, 2012 OS built-in AHCI inbox driver, no additional driver required • Supports Windows XP driver • Supports Hardware RAID 0, RAID 1, HybridDrive mode by GUI or BIOS setting in Windows, but Non-RAID only for drives attached to PM • Fully RoHS compliant
Please note your statutory rights are not affected.
Rated 4 out of 5 by PJ100 Handy piece of kit
I was looking to speed up disk access on my home lab server and this adapter meant I could add an SSD mSATA drive on board and connect a SATA HDD as well.
I run Windows Server 2012 R2 which isn't officially supported. The utility software for managing the Hybrid Drive function is a bit clunky and in the end I abandoned this in favour of using Server 2012 R2's new tiered storage. Word of warning - don't rely on the default AHCI drivers detected by Windows, as I had a few Blue Screen issues - make sure you download and install the correct storage controller drivers from the web site.
14 May 2015