Lewitt MTP 840 DM Active Microphone

Lewitt MTP 840 DM Active Dynamic Supercardioid Performance Microphone, 40Hz - 18kHz, Gold Plater 3-Pin XLR

Lewitt
Scan code: LN83073 Manufacturer code: MTP840 Request call
£173.54
In stock
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
High End
Free Delivery Delivery options Free By DPD On 21st Sep 2017 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout ScanProtect protection ScanProtect Protect against installation damage for 28 days.More
Product Overview Dynamic microphone - condenser sound
Versatility and durability, plus optimal suitability for punishing touring conditions with no compromises on sound: this is what the MTP 840 DM stands for. Its excellent transient response, refined electronics, and superior capsule design make the MTP 840 DM a unique tool for onstage use. Innovatively designed circuitry and the highest-quality components make for exceptionally low self-noise and a maximum of dynamic range when in Active Mode, and the frequency curve, – which is specially tailored for vocal recordings – provides the ultimate in sound quality. A three-step low-cut filter directly influences the proximity effect, permitting adaptation of the mic to individual preferences. The built-in three-position switchable amplifier, is specially adapted to the MTP 840 DM’s components, allowing lossless recording of even far-off sources. A supercardioid polar pattern provides maximum protection against feedback, and the flexibly suspended capsule reduces structure-borne noise to a minimum. The MTP 840 DM transports the artist’s voice in a powerful way, lending it the necessary presence without falsifying its individual character. Features Feedback-proof
The supercardioid polar pattern guarantees super-high gain before feedback. Like all microphones from the MTP series, the MTP 840 DM has an amazingly consistent polar pattern all across its entire frequency spectrum. And even with more than half of the wire-mesh cup covered, it will not lose any rear rejection.

Adjust your tools – take control
Boost your signal by switching to Active Mode - for ear-catching realism and distortion-free sonic depth. Take control over the low-cut filter to adjust the proximity effect to the artist and the application.

The capsule
• Ultra -detailed sound reproduction
• Lightweight yet super -rigid diaphragm design
• Supercardioid pattern for effective isolation of the sound source
• Hum compensation coil -– never worry about electromagnetic interference

Maximum ruggedness
The structure-in-structure architecture provides the basis for the MTP series' ruggedness. The outside enclosure of wire-mesh cup and ring is made of sturdy spring steel, while the body consists of durable zinc die -cast parts. The inner enclosure is made of resilient but lightweight nylon enforced-reinforced ABS. This design ensures the best possible protection for the rough daily touring routines.

Lowest handling noise
Our internal dual shock mount system achieves the most efficient handling noise elimination. Refined rubber suspensions provide the best possible dampening of unwanted structure-borne noise caused by hand- movement.
Specifications
Type Dynamic
Polar Pattern (Direction) Supercardioid
Impedance 600 ohms
Sensitivity 3.5 mV/Pa, -49 dBV/Pa
Frequency Response 40 - 18,000 Hz
Wired / Wireless Wired
Connectors 1 x 3 Pin XLR
Weight 336 g
Including Shock Mount No
Including Pop Shield Yes
Including Mic Clip Yes
Powered By
  • Non-powered
  • Phantom
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
12 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
12 months
Manufacturer Contact Details
Manufacturer:
Scan Computers International Limited
Telephone:
0871-472-4747
Reviews
Questions & Answers
Lewitt MTP 840 DM Active Microphone
Lewitt MTP 840 DM Active Microphone