End Of Life

EKWB MSI 980ti GAMING 6G Glass+Nickel GPU Waterblock

K-FC980 GTX Ti TF5 Waterblock, Glass Acrylic+Nickel, for MSI non-reference Twin Frozr V GAMING 6G GTX 980Ti GPU

Scan code: LN67947 Manufacturer code: 3831109830765 Request call
End Of Life
From £8.98 / month (APR 14.9%)
Monthly Payment: £17.35
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £99.98
Total inc. interest: £104.09
Monthly Payment: £8.98
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £99.98
Total inc. interest: £107.69
If you are approved for a credit limit with PayPal Credit and use it for future purchases, the APR for those purchases won't be more than 17.9% and may be even lower.

Representative Example:

Purchase Rate: 17.9% p.a. (variable)

Representative: 17.9% APR (variable)

Assumed Credit Limit: £1,200

Subject to status. Terms and Conditions apply.
High End
Product Overview EK-FC980 GTX Ti TF5 is a high performance full-cover water block for MSI non-reference design NVIDIA GeForce GTX 980 Ti Gaming 6G series graphics cards.

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks.

EK-FC980 GTX Ti TF5 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic perfromance allowing this product to be used in liquid cooling systems using weaker water pumps.

Base is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws and washers.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC980 GTX TF5 Backplate (R2.0) - Black or Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the memory IC on the backside of the circuit board.

G1/4" threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC980 GTX Ti TF5 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity.

Please note that EK-FC Bridge & Link system is not compatible with this water block. Features • Designed for MSI NVIDIA GeForce GTX 980 Ti GAMING 6G Graphics Card.
• Water block cools GPU, GPU RAM & VRM.
• Central inlet split-flow cooling engine design.
• Reverse flow compatible.
• Nickel-plated electrolytic copper base.
• High-quality acrylic glass top.
• G1/4" threads.
• Made in Slovenia.

• EK-FC980 GTX Ti TF5 water block.
• Mounting mechanism with screw-in brass standoffs.
• Thermal pads.
• Thermal grease EK-TIM Ectotherm (1g).

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

24 months
Return to base
DOA Period:
28 days
RTB Period:
24 months
Manufacturer Contact Details
Questions & Answers
EKWB MSI 980ti GAMING 6G Glass+Nickel GPU Waterblock
EKWB MSI 980ti GAMING 6G Glass+Nickel GPU Waterblock