Hague Camcrane With Stand & Ph100 Powerhead

Hague K10-PH100 Camcrane Camera Jib With Remote Control Powerhead

Scan code: LN81527 Manufacturer code: K10-PH100 Request call
£948.49Item currently awaiting an ETA
Pre order
Pay on Scan Finance with a 10% deposit from just £23.69 / month (APR 15.9%)
From £45.53 / month (APR 14.9%)
Monthly Payment: £164.59
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £948.49
Total inc. interest: £987.51
Monthly Payment: £85.15
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £948.49
Total inc. interest: £1,021.79
Monthly Payment: £58.72
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £948.49
Total inc. interest: £1,056.82
Monthly Payment: £45.53
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £948.49
Total inc. interest: £1,092.61
If you are approved for a credit limit with PayPal Credit and use it for future purchases, the APR for those purchases won't be more than 17.9% and may be even lower.

Representative Example:

Purchase Rate: 17.9% p.a. (variable)

Representative: 17.9% APR (variable)

Assumed Credit Limit: £1,200

Subject to status. Terms and Conditions apply.
High End
Free Delivery Delivery options Free By DPD DPD Delivered to your specified address. Receive SMS with one-hour delivery window. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout
Product Overview The Hague K10-PH100 Camcrane Camera Jib is ideal for lightweight cameras and offers full 360° movement. It is quick and easy to set-up and comes supplied with its own stand.

The stand's height is adjustable from 1.1 to 1.4 metres high with standard bar weights (not supplied) used for counterbalance, these are held in place by the weight bar and there is an adjustable fine trim weight to obtain perfect balance.

Once balanced the camera can smoothly move from ground level to almost 4 metres high and the crane will pan 360 degrees on the stand. You also have the ability to pan and tilt the camera through 360 degrees by controlling the underslung powerhead using the wired remote control box.

The distance from the stand to the camera is 2.5 metres and the K10 has a total length of 3.6 metres. It is ideal for all handheld cameras under 1kg.

The Hague PH100 Powerhead will pan and tilt through 360 degrees, this enables the camera to point directly down or in any direction required. It is powered by two powerful geared motors, with the camera’s tilt being belt driven, and this ensures the head provides a very smooth movement with minimum backlash.

The camera plate on the tilt drive has three mounting positions for the different sizes of camera which enables the camera to be correctly balanced. With all DSLR cameras it is essential that they are correctly balanced, and this can be more difficult depending upon the lens used, so we include the BCP Balance Correction Plate with the jib too. The speed of movement is variable, from the slowest crawl up to 24 degrees per second (0 to 4RPM).

Control Box

The Hague Control Box has two variable speed control knobs which give the head a precision pan and tilt movement in either direction, from a slow crawl up to the required speed. You can also pan and tilt simultaneously but you would require a second operator should you wish to pan, tilt and move the jib at the same time. The head is powered by a rechargeable internal battery, which enables the power head to be used anywhere without the need of a power supply.

On the back of the control box there are switches to change the direction of the control knobs and a socket for the control cable. On the side of the control box is an on/off switch and a battery charging socket. A led light on top of the box indicates when the unit is switched on. On the bottom of the control box there is a ¼” threaded hole in the base to allow it to be mounted to the MB/AD control box mounting bracket which is included with the K10-PH100 kit and has a separate mounting area for an external monitor to be attached. A 5 metre cable is supplied to connect the control box to the head.

Price includes the Hague K10 Camcrane with stand, PH100 Pan & Tilt Powerhead, BCP Balance Correction Plate & the MB/AD Control Box Monitor Mounting Bracket. Price does not include the camera, counterbalance weights or any other accessories shown. Features • Ideal for all handheld cameras under 1kg
• Powerhead pan and tilt through 360 degrees

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

12 months
Return to base
DOA Period:
28 days
RTB Period:
12 months
Manufacturer Contact Details
Scan Computers International Limited
Questions & Answers
Hague Camcrane With Stand & Ph100 Powerhead
Hague Camcrane With Stand & Ph100 Powerhead