EKWB XTOP SPC 60 Acetal PWM Water Pump+Top Combi
The core of the unit is EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation; no MOLEX connector is required! PWM control will allow you to set automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode! With the maximum pressure head at 3.2m (10,5 ft), maximum flow at 450 L/h and a very compact form, we recommend this pump for smaller builds, particularly if you are assembling your custom loop in a mini ITX case.
The pump features two G1/4 threaded ports of which one is an inlet on top and one is an outlet on the side of the unit. EK recommends EK-ACF series compression fittings. The top is made of quality POM Acetal material and the bottom features vibration-dampening rubber mounting system which effectively de-couples the water pump from the rest of the computer chassis.
EK-XTOP SPC-60 PWM - Plexi can also be upgraded with either EK-UNI Pump Bracket (120mm FAN) - Regular or Vertical (Not Included, Sold Separately), which allow installation of the product in any position with 120mm type fan hole pattern. Features Pump Electrical/Mechanical Specifications:
• Motor: Electronically commuted motor.
• Rated voltage: 12V DC.
• Power consumption: 6W.
• Maximum pressure head: 3.2m.
• Maximum flow rate: 450 L/h.
• Maximum liquid temperature: 50°C.
• Materials: PPS-GF30, EPDM O-rings, Aluminium oxide, graphite.
• Power connector: 4-Pin PWM FAN connector.
• PWM duty cycle: ~ 20-100%.
• Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present.
• Dimensions (W x D x H): 62 x 62 x 51 mm.
• Mounting hole pattern: 50x50mm.
• EK-XTOP SPC60 - Acetal.
• EK-SPC60 PWM 12V DC pump motor.
• Mounting mechanism.
• Installation manual.
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 24 months
Date Issued: 20th Oct 2008
This TekSpek explains why you’d want to overclock your graphics board, the risks in doing so and how you can go about doing it.
Date Issued: 19th Jun 2008
Watercooling for the PC has been around for years in some form or another, for at least as long as Scan have been in business, with basic physics defining why you want to use it. That means for air cooling, to cope with increasing temperature in the heatsink you need to move the air across it faster. That is why thermostatically controlled fans in your PC will turn faster the hotter something gets.
Date Issued: 5th Mar 2007
Anybody who has been near their share of computer systems will appreciate that not all systems make the same amount of noise. There are a number of reasons for why this is so. Firstly, a computer makes noise for different reasons. Generally, anything mechanical is going to make noise.