EK-XTOP DDC 3.2 PWM Elite - Plexi incl. pump
PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!
This top features two G1/4 threaded ports of which one is an inlet on top and one is an outlet on the side of the unit. EK recommends EK-ACF series compression fittings.
Despite a remarkably small footprint of 2.4" square, the pump features an astounding 7m of head to provide superior flow rates in today's most complex liquid cooled systems. The pump is also a high reliability, high pressure industrial pump, featuring a 50,000 hour MTBF (5 year lifetime).
The pump is nested inside the EK-DDC Heatsink Housing. This vastly improves the cooling performance of the motor and electronics and thus prolongs the lifespan of the water pump. Optimal heat transfer is ensured by the use of thermal pad inside the housing. Due to it's metallic construction and finned design EK-DDC Heatsink Housing amplifies the effect of airflow therefore placing the water pump in front of any fan or radiator will dramatically improve the cooling performance.
EK-DDC Heatsink Housing is made from cast ZAMAK (zinc, aluminum, magnesium, copper) alloy and features nickel plated finish.
This product also features vibration dampening rubber mounting system which effectively de-couples the water pump from the rest of the computer chassis.
EK-XTOP DDC 3.2 PWM Elite - Plexi can also be upgraded with either EK-UNI Pump Bracket (120mm FAN) - Regular or Vertical which allow installation of the product in any position with 120mm type fan hole pattern Features Technical Specifications:
• Dimensions (W x D x H): 63 x 68 x 55 mm
• Motor: Electronically commuted ball bearing motor
• Rated voltage: 12 V DC
• Power consumption: 18 W
• Maximum head pressure: up to 5.2m
• Maximum flow rate: up to 1000 L/h
• Maximum liquid temperature: 60 °C
• Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
• Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector
• Xylem original model name: DDC-3.25TPPWM4
• EK-XTOP DDC - Plexi
• EK-DDC 3.2 PWM 12V DC pump motor
• Mounting mechanism
• Installation manual
Made in Slovenia - EU!
Pump motor made in Hungary - EU!
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 24 months
Date Issued: 20th Oct 2008
This TekSpek explains why you’d want to overclock your graphics board, the risks in doing so and how you can go about doing it.
Date Issued: 19th Jun 2008
Watercooling for the PC has been around for years in some form or another, for at least as long as Scan have been in business, with basic physics defining why you want to use it. That means for air cooling, to cope with increasing temperature in the heatsink you need to move the air across it faster. That is why thermostatically controlled fans in your PC will turn faster the hotter something gets.
Date Issued: 5th Mar 2007
Anybody who has been near their share of computer systems will appreciate that not all systems make the same amount of noise. There are a number of reasons for why this is so. Firstly, a computer makes noise for different reasons. Generally, anything mechanical is going to make noise.