EKWB Standalone EK-RES X4 250 mm Glass Reservoir - Rev2.0
EKWB EK-RES X4 250 R2.0, 250x80mm Standalone Borosilicate Glass Cylindrical Reservoir, 8 Ports, 850ml Capacity
EK-RES X4 (R2.0) is a large high-quality standalone cylindrical reservoir. The first major distinction from the RES X3 is its sheer size with 250mm in height and the use of 80mm wide borosilicate glass tube. This provides a vast volume which allows the reservoir to hold up to 0.8 litres of liquid. This updated (R2.0) version of the EK-RES X4 features a nickel plated brass pillar that holds the top and bottom part of the reservoir together. It can be disassembled much more easily as its predecessor with the enclosed Allen key.
The top and bottom are machined out of quality POM Acetal with added locking O-rings for the glass tube. This is not ordinary glass but borosilicate glass, which is known for having low thermal expansion characteristics. This makes it resistant to thermal shock and reduces material stresses caused by temperature gradients. The bottom POM Acetal part also has a prepared groove for LED strip installation. You can install almost any LED strip or you can add the enclosed white Bright Light-emitting LED strip. The position of the cable for the enclosed LED strip can be adjusted as desired and it is powered by a standard SATA power connector.
The EK-RES X4 (R2.0) has two mounting options, one for wall mount in the case, and a 120mm fan mount for a stand-up configuration. Both enclosed mounting mechanisms are made from nickel plated steel wire and offer very fast easy installation and orientation adjustment.
Furthermore, the unit is packed with multiple ports, it features a total of 8 ports! The top has two G1/4" threaded ports and one 3/8" threaded port, which is intended as a fill port. The bottom features no more than five G1/4" threaded ports - you will be able to really find the perfect orientation and port configuration! There are two front-facing ports, two at the bottom and one on the rear that can be perfect for a drain port, with or without an added ball valve.
The top POM Acetal part can be used as an inlet by using the enclosed 150mm EK-HD Tubes, that simply plug into the top and are held in place by an O-ring. Installing the hard tube prevents the effect of splashing and foaming inside the reservoir. In the case of horizontal positioning, you will be also able to utilize the EK-HD Tubes that can serve as suction and pressure ports inside the unit (as illustrated in the manual). The reservoir comes with a pre-installed flat non-restrictive Anticyclone plate at the bottom that prevents the unwanted swirling of the liquid. Features • 250mm x 80mm borosilicate glass cylindrical reservoir.
• POM Acetal top & bottom with locking O-rings.
• 8 ports; 5x bottom G1/4", 2x top G1/4", & 1x top 3/8”.
• Two mounting options; wall or 120mm fan mount.
• Upto 850mL capacity.
• Includes White LED strip.
• Installation height: 250mm
• Overall diameter: Ø 98mm
• Tube diameter: Ø 80mm
• Capacity: ~850mL
• EK-RES X4 250 reservoir with preinstalled Anticyclone.
• Universal vertical reservoir holder.
• 120mm fan hole pattern reservoir holder.
• Pair of 150mm EK-HD Tubes and O-rings.
• LED light strip (SATA power plug).
• Set of plugs and extenders.
• Set of required Allen keys.
• Necessary mounting screws, nuts, and washers.
Important, Please Note:
• All the ports are recessed therefore it is mandatory to use the enclosed EK-Extender G1/4 (EAN: 3831109845165) with all the active ports.
• G3/8" port on the top is intended to be used only as a fill port.
• When using EK-Extender G1/4 make sure not to use fittings or barbs with G1/4 thread longer than 5mm! All EK-ACF and EK-HFB are compatible!
• When using ports #1 and #2 (front facing bottom ports) make sure not to use fittings or barbs with a diameter larger than 25mm! All EK-ACF, EK-HDC, and EK-HFB fittings are compatible!
• EK recommends the use of EK-ACF, EK-HFB or EK-HDC fittings. When using fittings other than EK-ACF or EK-HDC series, please use hose clamps or appropriate substitute to secure the tubing to the barb.
• When disassembling the reservoir, it is mandatory to degrease the gaskets and the glass tube. The best is to use alcohol and a gentle cloth. Not following this recommendation may lead to leakage.
• The use of coolant with biocides and corrosion inhibiting additives is always recommended for any liquid cooling system.
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 24 months
Date Issued: 20th Oct 2008
This TekSpek explains why you’d want to overclock your graphics board, the risks in doing so and how you can go about doing it.
Date Issued: 19th Jun 2008
Watercooling for the PC has been around for years in some form or another, for at least as long as Scan have been in business, with basic physics defining why you want to use it. That means for air cooling, to cope with increasing temperature in the heatsink you need to move the air across it faster. That is why thermostatically controlled fans in your PC will turn faster the hotter something gets.
Date Issued: 5th Mar 2007
Anybody who has been near their share of computer systems will appreciate that not all systems make the same amount of noise. There are a number of reasons for why this is so. Firstly, a computer makes noise for different reasons. Generally, anything mechanical is going to make noise.