EKWB GeForce GTX 1070 Acetal+Nickel GPU Water Block
EKWB EK-FC1070 Waterblock, POM Acetal+Nickel-plated, for NVIDIA GeForce GTX 1070 Founders Edition Graphics Card
to your specified address. |
Receive SMS with one-hour delivery window
Weekend, timed and European delivery options are available at checkout
Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery windowWeekend, timed and European delivery options are available at checkout
Collect from our Bolton store, BL6 6PE |
Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)
UPS and DPD Pickup Pickup from local convenience store |
Collect your parcel from your newsagents, petrol stations and convenience stores
Protect against installation damage for 28 days.
ScanProtect is an enhanced warranty specifically designed and offered by Scan to reduce the risk of any mishap or damage to components during installation.
Our aim with ScanProtect is to encourage our customers to upgrade or build their own PC confidently. For a small additional fee our customers are provided with complete peace of mind.
EK-FC1070 GTX is a high-performance full-cover water block for NVIDIA® GeForce GTX 1070 Founders Edition graphics cards.
This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1070 GTX water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.
The base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The top also features two pre-drilled slots for 3mm LED diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for a safe and painless installation procedure.
EK Water Blocks recommends the purchase of aesthetic retention backplate (EK-FC1070 GTX Backplate - Black or Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the FC Terminal. Up to four EK-FC1070 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity.
• The EK-FC Bridge & Link system is not compatible with this water block.
• NVIDIA® GeForce GTX 1070 factory backplate is not compatible with this water block!
• New NVIDIA® SLI HB bridges are not compatible with this water block. You can still use regular SLI bridge that comes with every SLI supported motherboard.
• EK-FC1070 GTX is identical to the EK-FC1080 GTX with the only difference being the different engraving. Features • Designed for NVIDIA® GeForce GTX 1070 Founders Edition Graphics Cards.
• Water block cools GPU, RAM & VRM.
• Central inlet split-flow cooling engine design.
• Reverse flow compatible.
• Nickel-plated electrolytic copper base.
• High-quality POM Acetal top.
• G1/4" threads.
• Made in Slovenia.
• EK-FC1070 GTX series water block.
• Mounting mechanism with screw-in brass standoffs.
• Thermal pads.
• Thermal grease EK-TIM Ectotherm (1g).
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 24 months