Scan code: LN114108 Manufacturer code: 3831109832691

EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black

EK Quantum Vector FE RTX 3080 Black Special Edition Water Block, 31x Microfins, Copper Base/Plexi Top, G1/4", Backplate

Thumbnail 1 : EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black Thumbnail 2 : EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black Thumbnail 3 : EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black Thumbnail 4 : EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black
Scan code: LN114108 Manufacturer code: 3831109832691
£249.89
Order now and get it tomorrow (upgrade to Saturday delivery at checkout)
From £12.00 / month (APR 14.9%)
Monthly Payment: £22.44
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £249.89
Total inc. interest: £269.18
Monthly Payment: £12.00
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £249.89
Total inc. interest: £287.84
If you are approved for a credit limit with PayPal Credit and use it for future purchases, the APR for those purchases won't be more than 21.9% and may be even lower.

Representative Example:

Purchase Rate: 21.9% p.a. (variable)

Representative: 21.9% APR (variable)

Assumed Credit Limit: £1,200

Subject to status. Terms and Conditions apply.
spend over £280 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
  • By DPD On 25th Oct to your specified address. | £11.50 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout

    Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery window

    Weekend, timed and European delivery options are available at checkout
  • Collect instore Collect from our Bolton store, BL6 6PE | Free

    Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)

  • UPS and DPD Pickup Pickup from local convenience store | £4.79

    Collect your parcel from your newsagents, petrol stations and convenience stores

Services
  • SCANPROTECT Protect against installation damage for 28 days. More info

    ScanProtect is an enhanced warranty specifically designed and offered by Scan to reduce the risk of any mishap or damage to components during installation.

    Our aim with ScanProtect is to encourage our customers to upgrade or build their own PC confidently. For a small additional fee our customers are provided with complete peace of mind.

  • 48HR REPLACEMENT If you need to return this item, your replacement will be dispatched within 2 working days of your product arriving back at Scan. More info
Product Overview

EK-Quantum Vector FE RTX 3080 D-RGB - Black Special Edition

This is a Special Edition Black EK water block enclosure engineered for the latest NVIDIA® GeForce® RTX ™ 3080 Founders Edition graphics cards. The cooling engine is the evolution of the 2nd generation EK® Quantum Vector GPU water blocks. This water block enclosure is only compatible with GeForce® RTX™ 3080 Founders Edition graphics cards.


Special Edition EK Water Block for Nvidia FE GeForce RTX 3080

The EK-Quantum Vector FE RTX 3080 D-RGB water block enclosure is the most complex GPU cooling solution developed by EK to date. The small form factor and unique shape of the RTX 3080 Founders Edition PCB presented a rare engineering challenge.

The water block is purpose-designed with an extremely thick copper base for high-performance, allowing it to clear all components of the densely-packed PCB and adding more heat capacity in the process. The cooling engine used in this water block is the largest we've built to date, having roughly 30% more surface area than the rest of the Vector water blocks.


A Testament to the Build Quality

Like the Magnitude CPU water block, the entirety of this water block is CNC-machined without mass-production techniques. The block's base is milled out of a 12 mm thick piece of pure electrolytic copper sourced from Europe, which is then nickel-plated, while its top is CNC-machined out of a glass-like cast Acrylic material.

The external enclosure, which is not in any contact with the coolant, is machined out of a 20 mm thick solid piece of aluminum, which is afterward anodized into a black color. The included single-slot I/O shield is supplied with special screws for attaching it to the aluminum enclosure in order to even out the entire water block's weight distribution. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.


Cooling Engine

This Special Edition Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximize cooling and minimize the chances of unwanted coil whine.?The flow paths are optimized to reduce hydrodynamic instabilities and vortexing (dead spots) inside of them.

The integrated Open Split-Flow cooling engine design proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance.

The jet plate and fin structure geometry are optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.? Fin array is populated by 31 microfins with 0.6 mm wide microchannels that provide exceptional cooling performance without unnecessary flow restrictions or clogging hazards.


Exclusive Backplate

This water block comes with an included backplate that makes sure the entire graphics card is enclosed and not at all visible. It also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM section. Due to the small size of the card and the block itself, the ribbed backplate boasts an increased surface area for additional passive cooling power. It's made of anodized aluminum in a silver finish.


Special Terminal Design

The water block is delivered with a set of connection terminals, allowing users to swap them out based on their needs. One terminal has two direct G1/4" ports on the side, while the other one is more conventional, having four G1/4" ports going through the terminal.

The new design allows terminals to be directly attached to the copper cold plate of the GPU water block, making it more rigid and reducing the chances of damage.? The terminal is neatly located between two prongs on the PCB, utilizing minimal space. This kind of design allows for incredible versatility, especially for Small Form Factor builds, and of course, more interesting aesthetics.


D-RGB LED Lighting

This water block boasts a whopping 20 individually addressable D-RGB LEDs that illuminate both the water block's interior and the terminal itself. It is compatible with all popular RGB Sync technologies from major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.


Features

Specification:
- Dimensions: (LxHxW) - 205x100x29mm
- D-RGB cable length: 500mm
- D-RGB LED count: 20
- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Please Note:
• Due to the immense variety of fittings/barbs available on the market, we guarantee compatibility only with EK fittings.
• Factory backplates are not compatible with this water block!
• Check your toolbox if you are missing the special Hex adapter for some of the screws.
• This product should NOT be installed with any aluminium Fluid Gaming parts!
• The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block!

Specifications
Type GPU Water Block
Edition EK-Quantum Vector FE RTX 3080 D-RGB - Black Special Edition
Graphics Card Product Line Compatibility GeForce RTX 3080
Graphics Card Edition Compatibility 3080 Founders Edition
Fluid Chamber/Top Material CNC Machined ''Glass-Like'' Acrylic
Cold Plate/Base Material Nickel-Plated Copper
Cold Plate/Base Cooling Fins 31
Port Threads G1/4"
LED Lighting D-RGB
Product Colour Black/ Aluminium
Controller Ctrl via Compatible Digital RGB Motherboard Heade
Max. Coolant Operating Temperature  
Compatible Cooling Loop Metals  
Compatible Coolants  
Included TIM (Thermal Interface Material)  
Dimensions 205 x 100 x 29 mm (WxHxD)
Weight  
Note  
Additional Information
Scan Code LN114108
Model Number 3831109832691
GTIN 3831109832691
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
24 months
Type:
Return to base
DOA Period:
7 days
RTB Period:
24 months
Manufacturer Contact Details
Manufacturer:
Scan
Loading Please Wait

Please wait . . .

EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black
EK-Quantum Vector FE RTX 3080 D-RGB Graphics Card Water Block Black