EKWB Gigabyte 980ti G1 WindForce 3x Acetal+Nickel GPU Waterblock

EK-FC980 GTX Ti WF3 Waterblock, Acetal+Nickel, for Gigabyte Non-Reference G1 Series WindForce GTX 980Ti Graphics Cards

EK
Scan code: LN67943 Manufacturer code: 3831109830925 Request call
£87.98
In stock
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
High End
Delivery options £5.48 By DPD On 12th Dec 2016 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout Scansure protection Scansure Protect against installation damage for 28 days.More
Product Overview EK-FC980 GTX Ti WF3 is a high performance full-cover water block for GIGABYTE non-reference design NVIDIA GeForce GTX 980 Ti G1 series graphics cards.

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks.

EK-FC980 GTX Ti WF3 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic perfromance allowing this product to be used in liquid cooling systems using weaker water pumps.

Base is made of nickel-plated electrolytic copper while the top is made of quality POM Acetal. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws and washers.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC980 GTX Ti WF3 Backplate - Black or Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the memory IC on the backside of the circuit board.

G1/4" threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC980 GTX Ti WF3 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity.

Please note that EK-FC Bridge & Link system is not compatible with this water block. Features • Designed for GIGABYTE non-reference GeForce GTX 980 Ti G1 Series Graphics Cards.
• Water block cools GPU, GPU RAM & VRM.
• Central inlet split-flow cooling engine design.
• Reverse flow compatible.
• Nickel-plated electrolytic copper base.
• High-quality POM Acetal top.
• G1/4" threads.
• Made in Slovenia.

Includes:
• EK-FC980 GTX Ti WF3 water block .
• Mounting mechanism with screw-in brass standoffs.
• Thermal pads.
• Thermal grease EK-TIM Ectotherm (1g).
Specifications
Specifications
Chipset Compatibility GeForce GTX 980 Ti
Base Material Copper/ Nickel Plated
Dimensions  
Weight  
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
24 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
24 months
Manufacturer Contact Details
Manufacturer:
Scan
Telephone:
0871-472-4747
Reviews
Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 by Another good quality EK product Bought this for the gigabyte gaming g1 (with the windforce 3 cooler as stock) 980ti. Fitting went very well, much easier than I thought it would be. Solid guidance from the instructions book, which is available online if you want to see how hard it is to do before committing. Bought the matching backplate, which I also reviewed, be aware this setup, like all water blocks is heavy, not an excessive amount more than the stock one, but still worth remembering. Excellent performance, gaming temps circa. 40'c now with 2x480 rads and delta t of ~4c. The finish is identical to the rest of the EK range, so matches perfectly. Love the stealth look! 06 February 2016
  • 2016-05-20 T12:53:08.405-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_67943, prod, sort_default
1-1 of 1
Questions & Answers
EKWB Gigabyte 980ti G1 WindForce 3x Acetal+Nickel GPU Waterblock
EKWB Gigabyte 980ti G1 WindForce 3x Acetal+Nickel GPU Waterblock