
Scan code:
LN45018
Manufacturer code:
3831109820773
EK-FB KIT EVGA X79 Classified - Acetal+EN (Nickel)
EK-FB KIT EVGA X79 Classified - Acetal+EN (Nickel)
Scan code:
LN45018
Manufacturer code:
3831109820773
spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
- By DPD On 19th Feb 2019 to your specified address. | £5.48 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout
- Collect instore Collect from our Bolton store, BL6 6PE | Free
- UPS and DPD Pickup Pickup from local convenience store | £4.79
- SCANPROTECT Protect against installation damage for 28 days. More info
Product Overview
EK-FB KIT EVGA X79 Classified is a complete water cooling solution consisting of two separate water blocks for EVGA X79 Classified (E779) and -FTW (E777) motherboard. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as EVGA factory cooling solution. This water block kit also features a high flow design therefore it can be easily used in liquid cooled systems using weaker water pumps.
Base of the waterblock is made of electroless nickel (EN) plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets.
Water blocks is mounted with enclosed M2.5x4 DIN7985 screws and PVC washers. The 2.1mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation. Features - 2 x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Please note: fittings and thermal grease are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-PSC fittings are compatible with this water block kit.
Base of the waterblock is made of electroless nickel (EN) plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets.
Water blocks is mounted with enclosed M2.5x4 DIN7985 screws and PVC washers. The 2.1mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation. Features - 2 x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Please note: fittings and thermal grease are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-PSC fittings are compatible with this water block kit.