Wireless Access Point with Power over Ethernet Dual-LAN support
The DrayTek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system (see details here). The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform.
The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.
For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.
The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data/devices.
USB Printer Port
The AP-810 has a USB interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-810, or a PC anywhere else on the network to whick the AP-810 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-810s to make a bridge.
WMM - WiFi Multimedia
The AP-810 implements intelligent wireless traffic prioritization for the most efficient management of wireless traffic by using the Wi-Fi Multimedia standard (WMM). WMM defines Quality of Service (QoS) in Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS standard, intended to improve timing critical applications such as audio, video and voice applications over WiFi. WMM adds prioritized capabilities to Wi-Fi networks and optimizes their performance when multiple concurrent applications, each with different latency and throughput requirements, compete for network resources.
WPS - WiFi Protected Setup
Wireless Security (encryption) is important to protect your data (privacy) but also to prevent unauthorised people from accessing your network or your Internet connection. The WPS system means that instead of having to create and enter long encryption keys, you can activate WPS registration. To activate, you press and hold the WPS button, then activate the WPS function on your PC; the two devices then automatically exchange encryption keys. For security, WPS an be disabled if the AP-810 is physically accessible.
The same button on the AP-810 also serves as a physical on/off switch for the Wireless LAN if you wish to quickly disable it at any time, whilst still leaving your wired ports active. Features • Business-class 802.11n WLAN access point.
• Manageable by DrayTek Wireless Management.
• PoE (Power-over-Ethernet) as standard.
• Dual isolated LAN interfaces.
• 4-Port Ethernet Switch.
• Detatchable Antennae - Can be replaced with uni-directional or higher-gain.
• Wireless Encryption : WEP, WPA, WPA2.
• Repeater/Bridge/Access Point/Station Modes.
• Wireless Client Isolation.
• Bandwidth management per SSID.
• 802.1q VLAN Tagging (two subnets/VLANs).
• Up to four distinct SSIDs (for VLANs).
• MAC Address Filtering.
• Optional USB Thermometer.
• Radius / WPA User Authentication.
• 802.1x User Authentication.
• WDS (Wireless Distribution System).
• WMM (Wireless MultiMedia).
• WPS - WiFi Protected Setup.
• Built-in Site Surveyor.
|Networking, Connectivity & Ports|
|Compatible Internet Connections|
|Other Connectors||1 x USB|
|Total LAN Connections||4|
|Total WAN Connections|
|64 Bytes L3 Forwarding Performance|
|512+ Bytes L3 Forwarding Performance|
|Wireless Band||Single Band|
|Wireless Transmitter Power||N/A|
|Internal RAM Memory|
|Internal RAM Memory Type|
|Internal Flash Memory|
|Max. Power Consumption|
|Security & VPN|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 14 days
- RTB Period:
- 24 months
- 0845 527 7864 9:00am-5:30pm Mon/Fri
Date Issued: 20th Oct 2008
Home networking let’s you do great things that aren’t possible with standalone PCs. Printers can be shared between PC, so there’s no need to buy one for each machine.
Date Issued: 20th Oct 2008
Port forwarding is a technique you’ll need to use to enable certain services if you’re using a router. If you don’t really care how it works, you can skip this section and just find out how to do it.
Date Issued: 19th Jun 2008
WiFi is a wonderful thing. You can take your laptop anywhere in your house and access the Internet, or access your network from the garden. However, it does introduce the grim possibility of somebody else doing exactly the same, without you ever knowing. This guide seeks to make you aware of various security terms and ideas associated with wireless networking and what you should consider when setting up a wireless network.
Date Issued: 26th Oct 2006
As a growing number of homes contain more than one computer, their users must find ways to network them. The primary purpose for creating a home network tends to be to provide Internet access to all computers within the house. There are other good reasons, however. These include enabling LAN gaming, data backups from one machine to another and the sharing of music within the home.