The front of the W1 is kept very sleek - only the slot-in bay for a slim optical drive is visible. In order to preserve the clean look, the power and reset button, the I/O panel and the two USB3 ports are located to the right of the case. The chassis of the W1 is made of high quality 0.8 to 1 mm thick SGCC steel that gives the case maximum stability. The front consists of brushed 1.5 mm thick aluminium. The sides and top are made from 2 mm thick aluminium. Air intakes in the left side panel and under the top cover allow optimal air flow.
The real strength of W1 is revealed when the side and top panel are removed: The interior of W1 is divided into two compartments, which provide two separate thermal zones for maximum compatibility and the installation of powerful components. This allows for the installation of high-end graphics cards with a maximum length of 320 mm, and for CPU coolers with a height of up to 215 mm.
The lower compartment allows for installation of high-end power supplies without any space restriction. In addition, up to two 2.5" HDD/SSDs can be conveniently mounted on the chassis floor if required.
The upper compartment where the motherboard is installed and the main HDD cage is located, is designed for the decoupled mounting of up to four 3.5" drives. The hard drives are simply equipped with anti-vibration screws and then inserted into the existing slots. Installation is incredibly easy and guarantees that vibrations are dampened. Above the HDD cage there is a mounting frame which accommodates a slot-loader optical drive. Features • Accommodates high end components
• Mini-ITX motherboard only
• Aluminium outer shell, steel body
• Two thermal compartments
• Supplied with two 140mm fans
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
Warranty information has not yet been updated for this product. For further information please call 0871 472 4747 or 01204 474747.