Contour 'n Boost by Carl Martin

Carl Martin - Contour 'n Boost Guitar Pedal, Stompbox

Carl Martin
Scan code: LN75663 Manufacturer code: Contour 'n Boost Request call
£199.99Item currently awaiting an ETA
Pre order
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
High End
Free Delivery Delivery options Free By DPD DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout Scansure protection Scansure Protect against installation damage for 28 days.More
Product Overview Carl Martin Contour’n Boost is especially designed to boost up, and change the sound (contour) of electric guitar/bass. The Contour’n Boost circuitry is of phase linear design, using high quality components. This ensures sonic clarity and midrange emphasis which is so important for electric guitar. The Contour’n Boost is designed as a High Pass (low cut) and Low Pass (high cut) filter, with a fixed X-over frequency at 440Hz. The High Pass filter operates from 65Hz to 440Hz, and the Low Pass filter from 440Hz to 8kHz. Both filters are individually sweepable, with a boost range of up to 12dB. With these two filters it is possible to change the sound (contour) in any way your creativity allows you. The Carl Martin Contour’n Boost has a built in, regulated (+-12V) power supply which enables us to design circuitry of the highest quality with maximum headroom. Please note that when using this unit with other effect devices, always place the Contour’n Boost after any distortion units, otherwise the distortion unit will limit what you can achieve with the Contour’n Boost.

"This is a great box, you can boost middle, or make it a top and bottom booster for that over the top clean sound found on expensive productions. Works great a toneshaper for drive too, lots of places to go with 4 knobs. Use it with my two Plexi ri heads and an old 58 Fender Bandmaster combo. No destroying your sound when the pedal is bypassed either, good buffers." - From Harmony Central

More information can be found in the User Manual below:
Data Sheet Features Specifications
• Input: 1M Ohm
• Output: 100 Ohm
• S/N Ratio: 80dB
• THD distortion: 0,01% at 0dB
• Frequency range: 65Hz - 8kHz
• High pass range: 65Hz to 440Hz
• Low pass range: 440Hz to 8kHz
• Boost range: +12dB
• Dimensions: 120 (W) x 95 (D) x 56 (H) mm / 4.72” (W) x 3.74” (D) x 2.2” (H)
• Weight: 625g / 1,38lbs
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
12 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
1 months
Manufacturer Contact Details
Manufacturer:
SCAN
Reviews
Questions & Answers
Contour 'n Boost by Carl Martin
Contour 'n Boost by Carl Martin