Antec H600 Pro Hydro All in One CPU Liquid Cooler

Antec H600 Pro Hydro Cooler with Blue LED Fan and 120mm Radiator for Intel & AMD CPU's

Antec
Scan code: LN68485 Manufacturer code: 0-761345-10901-7 Request call
£43.99
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
High End
Free Delivery Delivery options Free By DPD On 27th Nov 2017 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout ScanProtect protection ScanProtect Protect against installation damage for 28 days.More
Frequently Bought Together
Product Overview High-Performance Pump with LED Status Indicator. The integrated Status LED lights up during operation

7-Blade PWM 12cm Fan with Blue LEDs, Rifle Bearing keeps it whisper-quiet, while filling your rig with blue light.

High-Performance 120mm Radiator. A complex structure of 0.28 mm thick heat fins with 1.3 mm empty space in between each of them maximize the heat dissipation

Maximum Heat Fin Surface Area: 20 mm deep heat fin array increases the surface area for a maximum heat dissipation

High-Quality FEP Tubes: With minimal moisture absorption and high thermal & kinetic tolerances for a prolonged life

Ultra-thin Micro Heat Channels - High-density array of only 0.15 mm thin Micro Heat Channels with 0.2 mm space in between them.
3-Phase Liquid Pump Engine - For maximum pump speed and cooling cycles.
Graphite Pump Bearing - Heavy-Duty Graphite bearing for a long and whisper-quiet life time.
Ceramic Fan Bearing - For whisper-quiet operation with an incredible lifetime.
High-Performance Pump with LED Status Indicator - The integrated Status LED lights up during operation.
7-Blade PWM 12cm Fan with Blue LEDs - Its' Rifle Bearing keeps it whisper-quiet, while filling your rig with blue light.
High-Performance 120mm Radiator - A complex structure of 0.28 mm thick heat fins with 1.3 mm empty space in between each of them maximize the heat dissipation.
Maximum Heat Fin Surface Area - 20 mm deep heat fin array increases the surface area for a maximum heat dissipation. Features Block and Pump Array:
• High-density array of only 0.15 mm thin Micro Heat Channels with 0.2 mm space in between them
• For whisper-quiet operation with an incredible lifetime
• For maximum pump speed and cooling cycle
• Heavy-Duty Graphite bearing for a long and whisper-quiet life time.

Specification:
• Noise Level Range of Fan: 16~35dBA
• Fan Speed: 600-2400RPM
• Radiator Dimensions: 155mm x 120mmx 27mm
• Fan Size: 120mm x 120mm x 25mm
• Tube Length: 315mm
Specifications
Cooler Specifications
Edition H600 Pro
Cooler Form Factor 120mm All-In-One Hydro Cooler
Heatpipes  
Cooler Features Copper Base
Socket Compatibility
  • 1150
  • 1155
  • 1156
  • 1366
  • 2011
  • AM2
  • AM2+
  • AM3
  • AM3+
  • FM1
  • FM2
Max. Recommended TDP  
Max. Cooling Capacity  
Fan Specifications
Included Fan Configuaration 1 x 120mm
Fan Edition  
PWM Fan Yes
Fan Bearing Type Rifle Bearing
Fan Colour  
LED Lighting Colour Blue
Fan Connectors  
Approx Fan Speed 600 - 2400 rpm
Adjustable Fan Speed Controller Yes
Fan Airflow  
Air Pressure  
Sound Level (dB) 16 - 35 dB
Sound Level (Sone)  
Materials
Fan Material Plastic
Heatsink Material  
Included TIM (Thermal Interface Material)  
Dimensions & Weight
Fan Dimensions 120 x 120 x 25 mm
Heatsink Dimensions 155 x 120 x 27 mm (WxHxD)
Total Dimensions  
Weight  
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
60 months
Type:
Return to base
DOA Period:
7 days
RTB Period:
60 months
Manufacturer Contact Details
Customers also bought
Reviews
Antec H600 Pro Hydro Cooler with Blue LED Fan and 120mm Radiator for Intel & AMD CPU's is rated 3.5 out of 5 by 4.
Rated 1 out of 5 by from Terrible There is nothing good to say about it. It simply didn't work as advertised. After installing it three times and verifying every step did the CPU repeatedly run into thermal throttling. The pump itself showed no sign of overheating, the heatsink barely got warm, yet the speed on of the pump was around 3400rpm and the fan ran at about 2000rpm. The thermal paste had spread evenly and thin. Still, the CPU ran into thermal throttling after only 1-2 minutes of stress testing every time. Going back to an older air cooler is it all running fine again. My best guess is that the pump itself is faulty, maybe a blockage in the pipes, or perhaps the cooler just isn't capable of cooling an 150W CPU such as the AMD FX 8350. On top of this is the mounting procedure overly complex. It requires one to take out the entire mainboard and to install a plastic backplate (my mainboard's original backplate is made of metal ...). The springs on the screws need to be squeezed and trained by hand before they can fit onto the mount. And the strips of tape to glue the backplate into place are only usable once and leave a mess when taken off. The heat sink is made of aluminium and requires 6-32 sized screws for mounting. The threads are weak and cannot be tightened well. On a note, the copper plate of the pump has a rippled surface, which means it cannot make full contact with a CPU's heat spreader, but that 50% of it (the ripple valleys) will always fill up with thermal paste. Ideally should the surface be flat and smooth like a mirror. After first being excited about this cooler and the good reviews it got am I now just glad that nothing got damaged and that I could go back to an older air cooler. I definitely cannot recommend it and even if it was working would I keep looking for something better. It's low price cut in too far into it's quality. This just isn't a good cooler.
Date published: 2017-04-13
Rated 4 out of 5 by from Antec H600 Cooler notes Excellent cooler is the main plus point, another is that if it isn't woking correctly then the name glows red. A negative point is it is very fiddly to attach to the motherboard as the screws are difficult to start without moving the heatsink around on the cpu.
Date published: 2016-07-14
Rated 4 out of 5 by from Great value for the price This is a great product and look really good when installed. The instructions are really poor I fitted mine pretty much blind. Once installed with a bit of fiddling around I have to say it works very well. My processor is an AMD 8 core running @ 4ghz I over clocked it to 4.3ghz and it runs very stable. So don't miss out on this cooler but take your time fitting it.
Date published: 2016-06-27
Rated 5 out of 5 by from Fantastic cooler Bought this cooler back in March to replace the stock Intel cooler on my i5-4690k that was running 80c+ under high load, even at default clocks. --Pro's-- Top brand with 5 year warranty. Around 40% cheaper then other similar performing air/ liquid coolers. Simple, refined design with nice blue glow. Fan is retail quality and not a cheap one bundled in the box. Tube of thermal paste included with other fittings. Pump is quiet. --Con's-- Instructions are *terrible*. You are instructed to use horrible double-sided sticky strips to attach backplate to the motherboard making it hard to re-use. I managed to avoid using the strips although this caused the installation to be awkward. --Thing's you should know-- Don't over-tighten the screws on the water block. Just make sure they are *snug* enough to hold the water block in place. The Antec logo LED on the water block flashes if the liquid temperature goes above 65c. Improve the case airflow if this happens to you. The 3-pin fan connector on the pump/ water block needs to be plugged into a motherboard fan header to give pump RPM. Gigabyte motherboards have a CPU_OPT fan header for just this purpose. --Cooling results-- Currently its one of the hottest days of the year @ 25c. CPU is idling around 31c with the fan at 1200rpm (quiet). Under high load over several hours temps hover around 51c with fan speed at 1600rpm (louder but not distracting). Manually setting the fan to Full Speed you can knock 2-3c off your temps but at the cost of noise as the air rushes through the radiator. Overall: Excellent :)
Date published: 2016-06-08
  • y_2017, m_11, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_68485, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_scan
Questions & Answers

Paste or no paste?

Does this come with thermal paste?
Asked by: Sparkstar101
Yes.
Answered by: Svenson
Date published: 2017-06-17
  • y_2017, m_11, d_22, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_68485, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_scan
Antec H600 Pro Hydro All in One CPU Liquid Cooler
Antec H600 Pro Hydro All in One CPU Liquid Cooler