Alphacool NexXxos NVXP-3 ATI X1800/1900 GPU Chipset Cooler
The water is supplied centrally, which enables a highest possible cooling. This allows stable operation at extreme summer temperatures, highest overclocking potential and Low Noise at the same time.
This cooler is conceived for the highest requirements, therefore the RAM modules are also cooled. The channel leads directly over the RAM mounting parts in order to offer optimal cooling. The surface of the cooler is even, in order to adjust the differences of level. 8x 1,5mm thermal pads for the RAM mounting parts are included in delivery.
Above the GPU, the coolers only measure 1mm in order to achieve optimal cooling values. The sealing between plexiglass and copper cooler is made via a long-life O-sealing-ring. The mounting is made by means of the bores for standard air coolers which come with the Ati cards with screws. Two 5mm bores for optimal LED lighting are also available. The G1/4" connections are conceived for all connecting systems. A counter screen is included in delivery for optimal contact pressure!
For overclocking we would recommend using the Mosfett cooler For ATI Cards Features *Note: The GFX-cooler is delivered without connections you would need to order all required connectors
|Dimensions||136 x 24 x 91 (W x H x D mm)|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 12 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 12 months
- Scan Computers International Limited
Manufacturer's warranty is reprinted here for your information only. Warranty terms subject to change without notice.
We recommend that you retain your retail packaging within the first 28 days of purchase.
Subject to 2 years manufacturers warranty, return to Scan for the first 12 months.
Address: Internet: www.alphacool.de
Marienberger Str. 1
Support-eMail (Englisch): [email protected]
Support-Tel. :+49 (0)5 31/ 288 74-100
Fax: +49 (0)5 31/ 288 74-22
Water cooling products are designed to be fitted professionally.
Test the product for leakage away from the system before installing it on the system. Confirm there is no leakage, before you proceed with the installation. Use only approved coolant for computer water-cooling to prevent corrosion.
We highly recommend you carry out a 24/48 hour leak test prior to powering up your PC, and a system is fitted to monitor flow, and system temperatures.
Scan Computers International Limited will not be held responsible any damage due to abnormal use or conditions, misuse, neglect, abuse, accident, improper handling or storage, serial number altered, defaced or removed; or has had the warranty seal on the system altered, defaced or removed, exposure to moisture, unauthorized modifications, alterations, or repairs, improper installation, improper use of any electrical source, undue physical or electrical stress, operator error, non-compliance with instructions.