Scan code: LN94792 Manufacturer code: 13293

Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump

Alphacool Eisbecher DDC 250mm Acetal Reservoir incl Alphacool DDC310 Pump

Thumbnail 1 : Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump Thumbnail 2 : Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump Thumbnail 3 : Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump Thumbnail 4 : Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump
Scan code: LN94792 Manufacturer code: 13293
£89.99
spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
  • By DPD On 20th Aug 2019 to your specified address. | £5.48 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout

    Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery window

    Weekend, timed and European delivery options are available at checkout
  • Collect instore Collect from our Bolton store, BL6 6PE | Free

    Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)

  • UPS and DPD Pickup Pickup from local convenience store | £4.79

    Collect your parcel from your newsagents, petrol stations and convenience stores

Services
  • SCANPROTECT Protect against installation damage for 28 days. More info

    ScanProtect is an enhanced warranty specifically designed and offered by Scan to reduce the risk of any mishap or damage to components during installation.

    Our aim with ScanProtect is to encourage our customers to upgrade or build their own PC confidently. For a small additional fee our customers are provided with complete peace of mind.

Product Overview The Eisbecher DDC
The Eisbecher for the Laing DDC pump leaves no possibilities unexplored. The pump is easily attached to the underside with four screws. For the best overall appearance, Alphacool recommends using the metal bottom for the Laing DDC. For the plexiglass version, there are two 5mm holes for LEDs as well as a lighting module in the cap for illumination from above. Small standpipes and Bubble Down also do their work faultlessly here. The "Eisbecher" can be mounted either with the mounting bracket or with the included stands. If there is room in the 3.5" hard drive cage inside the case, the pump socket also has threads for this (requires pump decoupling with M4 inner and outer threads - Art. 52007).

The Eisbecher Series consist of 20 different reservoirs that differ between usage, measurement and appearance. There are ten reservoirs within this series that consist of 99% plexi - totally unique! But the main difference between these reservoirs is within the functionality of the different sockets.

Bubble Down
It is placed at the bottom of the reservoir to prevent turbulences that could lead air into the watercircle.

Lighttower Standpipe
The "Lighttower" effect creates an astounding visual experience within every watercooling system. The Eisbecher supports this in two different ways: fluid coming from the bottom and coming from the top. The water is being led through the standpipe to the bottom or to the top where it splashes out of eight evenly distributed holes at the end of the pipe to the inner wall of the reservoir. This special watergame is the so called "Lighttower" effect.

Stand
The known feet from the "Eisdecken" find its very way even to the Eisbecher and sustain every combination with a solid stand.

Mountings
There are two mountings placed above and under the pipe for fastening the lot in the casing. The holes in this mounting have a spacing of a 120/140 cooling fan.You can reduce the width of the mountings up to the width of the reservoir and there are three M4 threads availaible per mounting for fastening if you would rather not mount the reservoir at the fan space. These mountings are easily removeable especially when not being used. You will find these mountings on all 20 reservoirs.

Lighting module
The lighting modules consist of plexi and enable the lighting with a 5mm LED. These modules can be installed into all 1/4" holes. They are being used in the lid and occasionally in the socket of the reservoir. This facilitates a unique way to your personalised lighting effects.

Material
All models of the reservoir are availaible in acetal and plexi. So there is something for everone.

Measurements
All reservoirs are availaible in two different sizes: the 150mm version and the 10cm bigger 250mm version. The smaller reservoir comes with only one standpipe coming from the bottom because of its size and the bigger reservoir comes with two: one coming from the top and the other one from the bottom.

Please Note:
To use the inlet from the top you will need a G1/4" extension piece (Art. 1011183-1011186), as the thread is set into the lid a few mm and many nozzles will not screw in properly.
Features Dimensions for 250mm Version:
Measurements incl. bracket and stands (LxWxD): 304 x 136 x 88mm
Measurements without bracket incl. stands (LxWxD): 304 x 87 x 88mm
Plexiglass tube diameter: 60mm
Capacity: 360ml

Dimensions: 61 x 60 x 21mm
Colour: Black nickel, black
Power input: 10W
Material: brass, stainless steel, aluminium oxide, hard carbon
Maximum head: 2.44m
Maximum system temperature: 60°C
Maximum flow rate: 200L/h
Voltage: 12V DC
Electrical connection: 4 pin Molex
RPM signal: 3 pin Molex

Notice:
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Specifications
Core Specifications
Edition Eisbecher DDC
Product Type Pump/Reservoir Combi
Pump Specifications
Pump Yes
Pump Type  
Max. RPM  
Max. Hydraulic Performance  
PWM Duty Cycle Range  
Pump Voltage 12 V
Max. Power Draw 10 W
Reservoir Specifications
Reservoir Yes
Reservoir Capacity 360 mL
Fluid Chamber Construction  
Combined Specifications
Port Threads  
Temperature Monitoring  
LED Lighting  
Controller  
Power Connector 1 x 4-pin Molex (AMP Mate-N-Lok)
Power Cable Length  
Signal Connector  
Signal Cable Length  
Cabling Features  
Max. Coolant Operating Temperature 60 °C
Compatible Metals
  • Aluminium
  • Brass
  • Stainless Steel
Compatible Coolant  
Mounting System  
Installation Locations  
Product Colour Black
Dimensions 136 x 88 x 304 mm (WxHxD)
Weight  
Additional Information
Scan Code LN94792
Model Number 13293
GTIN 4250197132930
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
12 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
12 months
Manufacturer Contact Details
Manufacturer:
Scan
Telephone:
08714724747
Loading Please Wait

Please wait . . .

TekSpek Guides
Overclocking
Overclocking
Date Issued: 20th Oct 2008

This TekSpek explains why you’d want to overclock your graphics board, the risks in doing so and how you can go about doing it.

Read More

Watercooling
Watercooling
Date Issued: 19th Jun 2008

Watercooling for the PC has been around for years in some form or another, for at least as long as Scan have been in business, with basic physics defining why you want to use it. That means for air cooling, to cope with increasing temperature in the heatsink you need to move the air across it faster. That is why thermostatically controlled fans in your PC will turn faster the hotter something gets.

Read More

System Noise Reduction
System Noise Reduction
Date Issued: 5th Mar 2007

Anybody who has been near their share of computer systems will appreciate that not all systems make the same amount of noise. There are a number of reasons for why this is so. Firstly, a computer makes noise for different reasons. Generally, anything mechanical is going to make noise.

Read More

Reviews
Questions & Answers
Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump
Alphacool Eisbecher DDC 250mm Acetal Reservoir + DDC310 Pump