Rated 4.8 out of 5 by 4
Rated 5 out of 5 by Jaitch SATA Backplate
Kind of thing you expect to "just work" - and it does. Nice quality, but most impressive was Scan's service. Would warmly reccommend.
26 November 2015
Rated 5 out of 5 by jimh Neat solution for two SSDs
Well designed solution for housing two SSDs, and fitting to a 3.5" bay. The drives are very close together and require straight connectors.
15 September 2014
Rated 4 out of 5 by Jeremy Performs its function, and inexpensive
It performs its function, and is easy to install. The internal cable has plenty of length, so reaching the SATA ports shouldn't be a problem.
If I was to be picky I could say that the backplate feels a little bendy and flimsy when you plug the e-SATA cable in, but since its less than £3, one can't really complain too much!
27 July 2014
Rated 5 out of 5 by Bazza Does exactly what you expect.
Basically gives you an esata port from a motherboard sata connector. Plug and play, no config needed. Only problem you may have is hotplug. make sure your sata controller supports it, otherwise you will need to power the esata driver before booting the pc.
01 June 2014