Rated 4.3 out of 5 by 4
Rated 3 out of 5 by littlebluestars Fan controller, fiddly but works well
Replaced my Akasa controller with this one. Advantages are that the whole range of temperatures and fan speeds are visible at the same time and the installation was simple enough.
Downside is that the buttons to select and cycle through settings and fan selection are too small and fiddly, occluded by the speed control knob. Would have preferred it if they were located in a more visible position.
The unit appears to be within +/- 5 degrees of the correct temperature (tested using a thermometer in the place the sensors were located).
Sensor adhesive tape is rubbish, after a week it peels off.
07 August 2015
Rated 4 out of 5 by RLLBcheese Works well, a few quirks
This fan controller works well, but a few things to bear in mind:
1.) The output pins are 3-pin, rather than 4-pin, meaning they control the fans by voltage rather than PWM. There is enough space for 4-pin headers if that's what your fan requires
2.) The fan controller re-calibrates itself each time the required RPM is adjusted, meaning that it runs at max speed for about half a minute before trying to hone in on the RPM you want. This also happens when you turn the computer on.
3.) It occasionally forgets it's most recent RPM setting when the computer is turned off, meaning it defaults to max throtle on some of the fans.
4.) Different fans have different minimum RPM settings (except from off). The first fan is 1200 (i think), and can't be turned off, the second and fourth fans are 1100, the third is 1200, and I haven't tested the 5th yet. Max speed is 2100.
08 June 2014
Rated 5 out of 5 by Rokaz Good Quality, Nice looking, Fair price
Nice and long cables, good build quality, spare fan and temperature cable. Recommended
27 May 2014
Rated 5 out of 5 by Joe88 Good quality
Very good product. nice quality. Verygood display and easy to use
15 November 2013