ADAM A8X 8" Nearfield Monitor Speaker (Pair) + Iso Acoustics Stands + Leads

Product Overview This Bundle Contains :-
2x ADAM A8X Monitor - LN42818
2x 3m Adam Hall XLR to Jack - LN51059
1x Iso Acoustic stand for Large speakers - LN48436

The A8X the most powerful AX monitor
With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5") midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.

There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Note: Recommended subwoofers for this set: LN42823 - ADAM Sub12 Subwoofer

More information can be found in the PDF below:
Features • X-ART tweeter
• 8.5" carbon/rohacell/glass fiber-midwoofer
• 50W/150W amplification
• on-/off-switch and volume gain on the front
• tweeter gain and 2 shelf filters on the rear panel
• 38Hz - 50kHz
• XLR & RCA connectors
• 120dB max peak SPL per pair
• 5 years warranty

Technical Data

Mid-Woofer
• Number 1
• Basket Ø 8.5" (220 mm)
• Voice coil Ø 1.5" (38 mm)
• Cone material Carbon/Rohacell/Glass Fiber

Tweeter
• Number 1
• Type X-ART
• Diaphragm area 4 inch² (2420 mm²)
• Equiv. Diaphragm Ø 2" (56 mm)
• Velocity transform ratio 4:1
• Diaphragm weight 0.17 g

Built-in Amplifiers
• Mid-Woofer 1
• Type PWM
• Amp. power RMS / music 150 W / 225 W
• Tweeter 1
• Type A/B
• Amp. power RMS / music 50 W / 75 W

Control panel
• Input Sensitivity -8 to +14 dB
• High Shelf EQ > 5 kHz ±6 dB
• Low Shelf EQ < 300 Hz ±6 dB
• Tweeter gain ±4 dB

Input connectors
• Analog XLR / RCA

General data
• Frequency response 38 Hz - 50 kHz
• THD 90dB/1m > 100 Hz =0.5 %
• Max SPL with sine wave acoustic 100Hz to 3kHz at 1m =112 dB
• Max SPL per pair at 1m =120 dB
• Crossover frequencies 2300 Hz
• Input impedance 30 KOhm
• Weight 28.7 lb (13 kg)
• Magnetically shielded No
• Height x Width x Depth 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
• Warranty 5 Years

Delivery contents
• Power cord, Manual