ACS Live In-ear Monitor Professional Ambient Stage Sound Belt Kit
ACS Live! Ambient Processor Belt Pack, Ultra Low Latency Intelligent DSP, upto 30 hours Battery Life, + Aluminium Case
A brief history
When In-ear monitoring (IEM) was first introduced it really was a ‘game changer’. Instead of standing in front of wedge speakers, artists had total freedom to move around the stage and receive a much more individual and detailed mix. To keep sound levels at the ear low, it was necessary to provide good isolation to avoid competitive monitoring from the ambient on stage sound. ACS worked with Garwood Communications, the first to market with IEM, to develop custom moulded soft silicone earphones that delivered fantastic audio at the lowest levels. The high level of isolation from these innovative earphones is arguably one of the best features of custom IEM’s but it is also its greatest flaw. How often do you see a performing musician with one ear piece dangling down from their ear, or removing and replacing them during their performance?
This practice has been adopted because while wearing the IEM’s they cannot hear the audience or other band members, this can often leave them feeling detached and isolated from their surroundings. In extreme cases, this practice can lead to very serious hearing damage in the unprotected ear and in turn can negatively impact on the quality of their performance. With our Live Ambient Processor we have completely overcome this issue and once again are introducing a game changing product into the industry.
Let’s go Live!
The key to this products success is the microphones; with this in mind we have selected the best Omni-directional microphones available. They have a response curve which matches the natural hearing response of the ear and thanks to the positioning of the microphones they give a very natural sounding ambient experience with full 3D spatiality.
The usual mix is fed into the pack via the 3.5mm Line-In; the ambient signal can then be mixed onto the input using the gain adjustment dial. We have built in a PAD option in the menu which is adjusted using the Nav switch on the side of the pack. The PAD feature is there so the Ambient Pack can be used in very loud environments without causing the microphones to distort. In the menu is also an A.L.C (Automatic Level Control) option which is a compression system built into the DSP, this is very useful in rehearsal and sound checking situations where there is a constant change in volume and the risk of loud spikes in volume. With ALC activated quieter sounds will be amplified to be heard easier and loud spikes will be compressed to give an extra level of protection and to keep a more consistent ambient volume level at the ear.
The all-aluminium housing will ensure longevity of the product to ensure it survives the day to day knocks and travelling when on tour. On the back is a custom made high strength sprung steel belt clip which is secured with 4 screws to the rear housing. Even the battery door which houses the two AA batteries powering the pack is aluminium for a premium finish. The two AA batteries will give you at least 30 hours battery life under usual usage conditions. Features • Brings ambient sounds into your mix
• Full stereo image
• Ultra low latency due to intelligent DSP design
• Analogue bypass for Line-In
• Solidly built aluminium housing with a strong belt clip
• High contrast LED backlit display
• Long battery life
• PAD feature for additional protection in loud environments
• A.L.C – Automatic Level Control for rehearsal or sound checking
• Simple user friendly layout
• Just turn on – no additional software or set-up required
*In ear monitors sold separately
|Headphone Connector Type|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
Warranty information has not yet been updated for this product. For further information please call 0871 472 4747 or 01204 474747.