Edimax 8 Port PoE Gigabit LAN Network Switch GS-1008P
Complies with IEEE 802.3at Power over Ethernet (PoE)
The GS-1008P features 8 IEEE 802.3at Power over Ethernet (PoE) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features PoE detection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a PoE device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of PoE products, including access points, IP cameras and IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device.
No Special Networking Cable Required
The standard Cat-5 Ethernet cable is used to link the GS-1008P and the powered devices. This Ethernet cable can transmit both data and power. No separate power cable is needed for the powered devices, thus reducing installation time and costs.
Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments.
More information can be found in the PDF below:
Features • Complies with IEEE 802.3, 802.3u, 802.3x, 802.3af, and 802.3at standards.
• Supplies 48V DC with 30W output per port (150W total power budget).
• Automatically detects powered devices (PD) and power consumption levels.
• Supports auto fault detection (over/under current & voltage).
• Supports IEEE 802.3az Energy Efficient Ethernet.
|Total Network Ports||8 x 10/100/1000 (Gigabit) RJ-45|
|PoE Support Type|
|No. of Ports Providing PoE||8 x 10/100/1000 (Gigabit) RJ-45|
|Other Non-Network Ports|
|MAC Address Table Size|
|Built-in Flash Memory||128K|
|Max. Power Consumption||145 W|
|Max. PoE Wattage per Port|
|Mean Time Between Failures (MTBF)|
|Dimensions (WxHxD)||184 x 44 x 266 mm|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 24 months
- 0845 123 8307
Date Issued: 20th Oct 2008
Port forwarding is a technique you’ll need to use to enable certain services if you’re using a router. If you don’t really care how it works, you can skip this section and just find out how to do it.
Date Issued: 14th Jul 2008
It’s good to talk, but the way in which we get in touch with each other is changing. When once a letter, or a phone call over a shared line were the only ways to keep in touch with friends and relatives, there is now e-mail, instant messaging and text messages. The humble telephone isn’t sitting idly by, however. Telephony is evolving and it is using the Internet to keep up with the competition.
Date Issued: 26th Oct 2006
As a growing number of homes contain more than one computer, their users must find ways to network them. The primary purpose for creating a home network tends to be to provide Internet access to all computers within the house. There are other good reasons, however. These include enabling LAN gaming, data backups from one machine to another and the sharing of music within the home.