Sabrent Rocket Q4 4TB M.2 PCIe 4.0 NVMe SSD/Solid State Drive
Scan code: LN112441
Manufacturer code: SB-RKTQ4-4TB
End Of Life
Sabrent Rocket Q4 4TB M.2 PCIe 4.0 NVMe SSD/Solid State Drive
4TB Sabrent Rocket Q4, M.2 (2280) PCIe 4.0 (x4) NVMe SSD, QLC, 4900MB/s Read, 3500MB/s Write
Scan code:
LN112441
Manufacturer code:
SB-RKTQ4-4TB
This product is no longer available to purchase. See our suggested alternatives below.
- SCANPROTECT Protect against installation damage for 28 days. More info
Suggested Alternatives
Product Overview
Features
• NVMe M.2 PCIe Gen4 x4 Interface.
• Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands.
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Levelling, Bad Block Management, Error Correction Code, and Over-Provision.
• Upgradeable Firmware.
Based on QLC NAND Flash memory, its performance speeds can reach up to 4900 MB/s (read) and 3500 MB/s (write) when using a PCIe Gen4 motherboard. The Sabrent Rocket Q4 is backwards compatible with PCIe 3.0 allowing use of a PCIe Gen3 motherboard achieving speeds of up to 3300 MB/s (read) and 3300 MB/s (write). Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems.
Note: When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance.
• Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands.
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Levelling, Bad Block Management, Error Correction Code, and Over-Provision.
• Upgradeable Firmware.