Phobya LED-Flexlight HighDensity 30cm UV

30cm Phobya 83126 LED-Flexlight HighDensity UV 36x SMD LEDs

Phobya
Scan code: LN54767 Manufacturer code: 83126 Request call
£12.98Item currently awaiting an ETA
Pre order
Buy Now, Pay Later with a 10% deposit. Or spread the cost of your finance over 24-48 months.
3xs Approved High End
Delivery options £5.48 By DPD DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout Scansure protection Scansure Protect against installation damage for 28 days.More
Product Overview The ultimate modding highlight! Make your PC true eye-candy!

With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy and hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure.
Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption and barely any heat dissipation. Additionally the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look!
The great quality of manufacturing and advanced technology makes Flexlights the ultimate lighting solution!

Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours!
Features
Specifications
Specifications
Input Voltage 12V - 14V
Current DC
Input Current  
Power Consumption  
Luminous flux  
Color Temperature  
Colour Rendering Index (CRI)  
Fitting 4-pin Molex
Life Span  
Incandescent Equivalent  
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
12 months
Type:
Return to base
DOA Period:
7 days
RTB Period:
12 months
Manufacturer Contact Details
Manufacturer:
scan
Reviews
Rated 2.2 out of 5 by 5 reviewers.
Rated 1 out of 5 by Disappointing These LEDs were ok to start off with but faded significantly after only 2 weeks of use (about 8 to 10 hours per day). Also the tone / frequency of the UV light they emit is poor in comparison to others... even proper UV reactive products don't glow much under these LEDs. I've since replaced them with CableMod Widebeam UV LED strips which are far superior in brightness, tone / frequency and in 4 weeks of use they haven't faded at all that I can see. Don't waste your time with these... go for the CableMod LEDs instead, yes they are more pricey but you get what you pay for ;) 05 May 2016
Rated 1 out of 5 by Lights are good but fall off The light is bright however the provided backing 3M tape is awful, it was peeling away before application and fell off right away leaving the tape stuck in my case. I have since had to run out and get some double sided tape to use on these lights in the interim. If you plan on buying the lights ensure that you have something to stick or hold them in place as the provided method is not fit for purpose 11 March 2016
Rated 2 out of 5 by Don't retain their brightness. Installed 2 of these and one ccfl. The leds gradually lost their luminance over a 4 month period and are now really weak. The cathode is still going strong. 30 May 2015
Rated 2 out of 5 by Get very hot and some connections are dodgy Flexible nature makes some diodes seem damaged but a little wiggly fixes them. LED's get hot, but if you stick to metal case then probably is OK This is my first LED UV light, used many cathode tubes in the past. I prefer the old cathode tubes, these are bright and brash, but I have been able to hide them away a little - others may like this 20 November 2014
Rated 5 out of 5 by very bright Great product The uv coolant in my system really stands out now thanks to these led light strips 17 October 2014
  • 2016-05-20 T12:52:45.802-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_54767, prod, sort_default
1-5 of 5
Questions & Answers
Phobya LED-Flexlight HighDensity 30cm UV
Phobya LED-Flexlight HighDensity 30cm UV