Corsair Vengeance Blue LED 16GB DDR4 2666 Memory Kit 2x 8GB
16GB (2x8GB) Corsair DDR4 Vengeance LED, PC4-21300 (2666), Non-ECC Unbuffered, CAS 16-18-18-35, Blue LSX, XMP 2.0, 1.2V
Corsair DDR4 Vengeance LED 16GB (2x8GB) 2666MHz Memory (Blue)
Corsair DDR4 Vengeance LED RAM
Corsair Vengeance LED Series DDR4 memory modules are designed to provide a unique look with vibrant LEDs and a precision engineered light bar. This Vengeance PC RAM and it’s unique style comes as 2 memory modules, each containing 16GB of DDR4 memory. This memory density is a comfortable RAM count for the average PC user; games, film and various other media will run without memory issues. At 2666MHz this memories speeds are high enough to grant the RAM an impressive count while staying low enough to ensure a relatively low CAS Latency – forging great performance between the two.
this LED Memory is also available in:
RED DDR4 LED Vengeance Memory | WHITE DDR4 LED Vengeance Memory | RGB DDR4 LED Vengeance Memory
Memory Performance Advancements
(Lower is better)
(Higher is better)
(Higher is better)
Experience the True Power of DDR4 RAM
It was 2007 that the DDR3 standard was announced and in the years since then technology has only been pushed further. Eventually the memory standard was pushed to the edge of DDR3 limits, until DDR4 smashed through those limits! Corsair DDR4 doubled the bandwidth and dramatically increase clock speeds, whilst consuming less power than ever before.
LED Embeded Memory
Outshine All Other RAM
DDR4 Vengeance LED RAM features unique colour options and a custom LED light embedded into the top of the DDR4 memory. The LED will display in either Red, Blue or white depending on which RAM is purchased, the chosen colours have been specifically selected to complement the style of your system through pairing with the latest high-end motherboards and PC components.
Installing DDR4 Memory
Motherboard Socket DDR4 Optimization
Pin Out: 288
Vengeance LED DDR4 form factor is optimized and compatibility-tested for the latest Intel X99 and 100 series motherboards, forging reliably fast performance. With any standard DDR4 DIMM memory socketed motherboard you shouldn’t have any trouble installing the impressive Vengeance LED DDR4 series.
Overclocking DDR4 RAM
Pushing RAM Performance Even Further
Corsair have heavily designed the Vengeance LED DDR4 around high-performance overclocking. Each module from the Veng eance LED RAM series is built with highly-screened memory ICs and an eight-layer PCB, with further overclocking improvments through the efficient heat spreader that provides effective cooling.
The DDR4 memory sticks boast an eight layer PCB system. If your computer is trying to squeeze too much information into one layer then you are going to experience a significant rise in temperature. That rise in temperature will evetually cause overheating, resistances changes and things will stop working correctly. Utlizing eight layers helps eliminate this.
Each computer memory module is equipped with numerous ICs or Integrated Circuits. Each IC in the Corsair Vengeance LED series is rigorously tested to check for defects in the technology. This is done by applying particular ‘patterns’ to them to see if the outcome has any faulty circuit behavior and if so determine the cause of failure. Using the best of the best IC’s leads to highly overclockable memory.
Vengeance LED Heat Spreader
Cooler Memory for Better Performance
The heat spreader on Corsair vengeance LED DDR4 memory is made of Anodized Aluminum, creating a faster heat dissipation and a much cooler operation. Usually the overclocking overhead is limited by operating temperature, but not for the Vengeance LED. Due to the unique design of the heat spreader, the temperature is continuously lowered as heat is pulled away from the ICs and into your system’s cooling path - allowing you to push it even harder!
Easy XMP RAM Overclocking
Utilize XMP for Overclocking in Seconds
XMP 2.0 is supported by both vengeance LED DRAM and Intel’s X99 and 100 series motherboards. Simply select XMP mode in the BIOS and it will automatically adjust to the fastest safe speed for the Corsair DDR4 Vengeance LED. You’ll get amazing, reliable performance without lockups or other strange behavior. Enjoy trouble-free, automatic overclocking with the support of XMP 2.0.
|Memory Model||Vengeance LED|
|Max. Memory Channels Provided by Kit||Dual (2)|
|Memory Type (ECC)||Non-ECC|
|Memory Type (R/U)||UDIMM (Unbuffered)|
|Memory Speed||PC4-21300 (2666)|
|Validated Compatible with|
|Cooler||Anodised Aluminium Heatspreader|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- DOA Period:
- 28 days
- RTB Period:
- 24 months
- Corsair / SCAN
- 0871 472 4747