Corsair 16GB Dominator Platinum DDR4 3200MHz RAM/Memory Kit 4x 4GB
Corsair DDR4 Dominator Platinum 16GB (4x4GB) 3200MHz Memory (White)
CORSAIR DDR4 DOMINATOR PLATINUM RAM
With four modules of RAM at 4GBs each, your 16GB memory will have no problem running next-gen games or data processing. By utilizing both DDR4 and Dominator Platinum advantage’s this memory type and density is sure to keep the average desktop PC comfortable with any and every task it is set. Whether you’re browsing the web, streaming or next-gen gaming, then Vengeance LPX 3200 will confidently do its part – potential for hosting large scale gaming sessions. The CL of this memory is quite high, and the volts have been raised to 1.35 but the MHz speed is huge.
Available in: RED DDR4 Dominator Platinum ROG Edition memory
DOMINATOR PLATINUM FEATURES
Configurable and upgradable top bar
Configurable and upgradable light pipe
Patented Dominator DHX Cooling Technology
Corsair Link to monitor temperature and voltage
Machined aluminum hear sinks for convective heat dissipation
Custom PCB optimized for conductive heat transfer out of the memory
Hand sorted performance ICs: the foundation for highly overclockable memory
MEMORY PERFORMANCE ADVANCEMENTS
(Lower is better)
(Higher is better)
(Higher is better)
Experience the True Power of DDR4 RAM
It was 2007 that the DDR3 standard was announced and in the years since then technology has only been pushed further. Eventually the memory standard was pushed to the edge of DDR3 limits, until DDR4 smashed through those limits! Corsair DDR4 doubled the bandwidth and dramatically increase clock speeds, whilst consuming less power than ever before.
INSTALLING DDR4 MEMORY
Motherboard Socket DDR4 Optimization
Pin Out: 288
Dominator Platinum DDR4 form factor is optimized and compatibility-tested for the latest Intel X99 and 100 series motherboards, forging reliably fast performance. With any standard DDR4 DIMM memory socketed motherboard you shouldn’t have any trouble installing the powerful Dominator Platinum DDR4 series.
OVERCLOCKING DDR4 RAM
Pushing RAM Performance Even Further
Corsair have heavily designed the Dominator Platinum DDR4 around high-performance overclocking. Each module from the Dominator RAM series is built with highly-screened memory ICs and an eight-layer PCB, with further overclocking improvments through the efficient heat spreader that provides effective cooling.
These DDR4 memory sticks boast an eight layer PCB system. If your computer is trying to squeeze too much information into one layer then you are going to experience a significant rise in temperature. That rise in temperature will evetually cause overheating, resistances changes and things will stop working correctly - utlizing eight layers helps eliminate this problem.
Each computer memory module is equipped with numerous ICs or Integrated Circuits. Each IC in the Corsair DDR4 Dominator Platinum series is rigorously tested to check for defects in the technology. This is done by applying particular ‘patterns’ to them to see if the outcome has any faulty circuit behavior, and if so determine the cause of failure. Using the best of the best IC’s leads to highly overclockable memory.
DHX DOMINATOR HEAT SPREADER
Cooler Memory for Better Performance
The heat spreader on Corsair Dominator DDR4 memory is made of pure aluminum, creating a faster heat dissipation and a much cooler operation. Usually the overclocking overhead is limited by operating temperature, but not for the Dominator Platinum. Due to the unique design of the heat spreader, the temperature is continuously lowered as heat is pulled away from the ICs and into your system’s cooling path - allowing you to push it even harder!
EASY XMP RAM OVERCLOCKING
Utilize XMP for Overclocking in Seconds
XMP 2.0 is supported by both Dominator Platinum DRAM and Intel’s X99 and 100 series motherboards. Simply select XMP mode in the BIOS and it will automatically adjust to the fastest safe speed for the Corsair DDR4 Platinum kit. You’ll get amazing, reliable performance without lockups or other strange behavior. Enjoy trouble-free, automatic overclocking with the support of XMP 2.0.
DOMINATOR DDR4 LIGHTKIT
x2 light Bars | 2x Arctic White Colour Inserts | 2x Cerulean Blue Colour Inserts | z10 Spare Screws and Nuts | Installation Tool | Quick Start Guide
Customize your DDR4 Memory
With the Dominator Platinum memory you can personalize your modules more than ever before. The Dominator Platinum Light kit contains all you will need to upgrade two memory modules to either Corsair signature Arctic White or Cerulean Blue illumination - or even one of each. Upgrade by simply removing the top bar and install a coloured lens before reattaching the bar. All needed tools are included.
LightKit comes with specific Dominator memory, always make sure to check
|Memory Model||Dominator Platinum|
|Max. Memory Channels Provided by Kit||Quad (4)|
|Memory Type (ECC)||Non-ECC|
|Memory Type (R/U)||UDIMM (Unbuffered)|
|Memory Speed||PC4-25600 (3200)|
|Validated Compatible with|
|Cooler||Aluminium Heatspreader with DHX|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 36 months
- DOA Period:
- 28 days
- RTB Period:
- 36 months
- 0871 472 4747