Dlink DES-1016D/B 16 port 10/100 Switch
The DES-1016D is an unmanaged 10/100Mbps switch designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
16 Auto-sensing 10/100Mbps Ports
The switch comes with 16 10/100Mbps ports, allowing a small workgroup to flexibly integrate to Ethernet and Fast Ethernet. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T, as well as between full and half-duplex.
Flow Control for Secure Transmission
All ports support flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full.
Auto-negotiation of MDI/MDIX Cross Over
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.
With 16 plug-and-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in full duplex, or hubs in half-duplex.
Direct Connection to Workstations
With low-cost connection per-port, the switch can be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network. Features • 16 10/100Mbps ports.
• Full/half duplex support for each port.
• MDI uplink port for easy expansion.
• Auto-learning of network configuration.
• Flow control in full duplex mode for protection against data loss.
• Back pressure in half duplex mode.
• RAM buffer dynamically allocated for each port.
|Total Network Ports||16 x Fast Ethernet 10/100|
|PoE Support Type|
|No. of Ports with PoE|
|Other Non-Network Ports|
|Forwarding Performance/Bandwidth||3.2 Gbps|
|MAC Address Table Size|
|Built-in Flash Memory|
|Max. Power Consumption||6.8 W|
|Mean Time Between Failures (MTBF)||47220 hours|
|Dimensions (WxHxD)||280 x 44 x 180 mm|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- DOA Period:
- 28 days
- 0845 612 0003/0871 873 3000
"Please be aware any warranty offered in excess of 12 months is at the manufacturer's discretion and maybe subject to change without notice."
We recommend that you retain your retail packaging within the first 28 days of purchase.
Warranty is with Scan/D-Link for 1 year from our invoice date, outside of this please contact D-Link directly on 0871 873 3000
Dlink Product Warranty Period:
Online D-Link warranty using the link below:
This Warranty does not cover any damage due to abnormal use or conditions, misuse, neglect, abuse, accident, improper handling or storage, serial number altered, defaced or removed; or has had the warranty seal on the system altered, defaced or removed, exposure to moisture, unauthorized modifications, alterations, or repairs, improper installation, improper use of any electrical source, undue physical or electrical stress, operator error, non-compliance with instructions.