Rated 4 out of 5 by 6
Rated 2 out of 5 by knightshade Good solid case but let down by a couple of faults
Good solid case, no sharp edges, easy to install components.
Although it is supplied with a USB connector there is no USB 3.0 to 2.0 converter so if you don't have a USB 3.0 header on your motherboard then you need to get one!
The other problem was the mainboard mounting screws, these were a stupidly tight fit, so much so that a ratchet socket was required to do them up properly so they all sat flush.
All in all, not bad but not brilliant either.
03 September 2013
Rated 5 out of 5 by cheetah good mATX case with USB 3.0
Most budget systems are using micro ATX board, this case will fit any micro ATX board, the material is very good and easy to build your own system. The best of all is it comes with USB 3.0 header, which is quite expensive with some cases, but this one, less than £30, of course you need to put your own power supplies. Consider the material, design and USB 3.0, it's value for money.
28 August 2013
Rated 4 out of 5 by Boffinboy Excellent for the price, though build quality not great
Excellent features for a very low price, especially USB 3.0, fan and fan filters. Don't expect the best build quality though. Thumbscrews needed a screwdriver to turn as the holes in chassis were not properly machined. Doesn't affect function though, and would still recommend.
05 August 2013
Rated 4 out of 5 by Richard Small size and nice design.
USB 3.0 included.
Only one fan included.
Hard to install motherboard do to fixed driver cages.
20 May 2013