Highpoint RocketRAID RR2740LF 16 channel Internal PCI-E 2.0 x16 to SAS/SATA 6Gb/s RAID controller
Scan code: LN34791
Manufacturer code: RR2740LF
End Of Life
Highpoint RocketRAID RR2740LF 16 channel Internal PCI-E 2.0 x16 to SAS/SATA 6Gb/s RAID controller
16 Port Highpoint RocketRAID RR2740LF Internal PCI-E 2.0 x16 to SAS/SATA 6Gb/s RAID controller
Scan code:
LN34791
Manufacturer code:
RR2740LF
This product is no longer available to purchase.
Email me when the availability or price changes
Product Overview
The RocketRAID PCI-E Gen 2.0 switch architecture is the revolutionary design for overcoming the performance bottleneck of conventional HBA designs. The Switch Architecture design aggregates multiple SAS controllers and utilizes point-to-point SAS connectivity to deliver maximized performance. Each SAS engine has a dedicated PCI-E path to deliver maximum SAS 6Gb/s performance for each device.
Features
• Online capacity expansion (OCE) and Online RAID level migration (ORLM)
• RAID Array Roaming
• Unplug/Remove RAID array
• Hot key (ctrl-h) boot-up RAID manager via BIOS
• Firmware update while running the Operating System
• Verify RAID Array for Bad Sectors and Parity Check
• Task Scheduler
• Automatic RAID rebuild
• Automatic drive (insert / removal) detection
• Hot Spare Disk
• Staggered Drive Spinup
• Rebuild Priority (Low - Highest)
• Spin Down Idle Mode
• Hot Swap and Hot plug
• Bad sector repair and remapping to reduce dropped drives
• Multiple RAID array
• Multiple Logical Drive
• 64bit LBA support greater than 2TB per volume
• SMTP for email notification
• Alarm / Buzzer alerts for drive failure
• SES-2 enclosure management (Failed, SMART (SHI))
• Enclosure management support I2C
• Hard Drive LED indicators (Activity and Failed)
• SHI (Storage Health Inspector - Drive analysis from S.M.A.R.T)
• Event Log
• RAID Array Roaming
• Unplug/Remove RAID array
• Hot key (ctrl-h) boot-up RAID manager via BIOS
• Firmware update while running the Operating System
• Verify RAID Array for Bad Sectors and Parity Check
• Task Scheduler
• Automatic RAID rebuild
• Automatic drive (insert / removal) detection
• Hot Spare Disk
• Staggered Drive Spinup
• Rebuild Priority (Low - Highest)
• Spin Down Idle Mode
• Hot Swap and Hot plug
• Bad sector repair and remapping to reduce dropped drives
• Multiple RAID array
• Multiple Logical Drive
• 64bit LBA support greater than 2TB per volume
• SMTP for email notification
• Alarm / Buzzer alerts for drive failure
• SES-2 enclosure management (Failed, SMART (SHI))
• Enclosure management support I2C
• Hard Drive LED indicators (Activity and Failed)
• SHI (Storage Health Inspector - Drive analysis from S.M.A.R.T)
• Event Log