USE LN 46798 - Hynix 4GB DDR3 PC3-10600 (1333) Single Channel Server Memory
Scan code: LN27484
Manufacturer code: HMT151R7TFR4C-H9D2-C
End Of Life
USE LN 46798 - Hynix 4GB DDR3 PC3-10600 (1333) Single Channel Server Memory
USE LN 46798 - 4GB Hynix Server Memory, DDR3, PC3-10600 (1333MHz), 240 Pin, Registered, CAS 9-9-9
Scan code:
LN27484
Manufacturer code:
HMT151R7TFR4C-H9D2-C
This product is no longer available to purchase.
Email me when the availability or price changes
- SCANPROTECT Protect against installation damage for 28 days.
Product Overview
This Hynix DDR3 SDRAM Registered Dual In-Line Memory Module (DIMM) series consists of 1Gb A generation. These are intended for use as main memory in server and workstation systems, providing a high performance 8 byte interface in 133.35mm width form factor of industry standard. It is suitable for easy interchange and addition.
Features
• Fully differential clock inputs (CK, CK) operation
• Differential Data Strobe (DQS, DQS)
• On chip DLL align DQ, DQS and /DQS transition with CK transition
• DM masks write data-in at the both rising and falling edges of the data strobe
• All addresses and control inputs except data, data strobes and data masks latched on the rising edges of the clock
• Programmable burst length 4/8 with both nibble sequential and interleave mode
• BL switch on the fly
• 8K refresh cycles /64ms
• Driver strength selected by EMRS
• Dynamic On Die Termination supported
• Asynchronous RESET pin supported
• ZQ calibration supported
• TDQS (Termination Data Strobe) supported (x8 device based only)
• Write Levelization supported
• Auto Self Refresh supported
• 8 bit pre-fetch
• SPD with Integrated TS of Class B
• Differential Data Strobe (DQS, DQS)
• On chip DLL align DQ, DQS and /DQS transition with CK transition
• DM masks write data-in at the both rising and falling edges of the data strobe
• All addresses and control inputs except data, data strobes and data masks latched on the rising edges of the clock
• Programmable burst length 4/8 with both nibble sequential and interleave mode
• BL switch on the fly
• 8K refresh cycles /64ms
• Driver strength selected by EMRS
• Dynamic On Die Termination supported
• Asynchronous RESET pin supported
• ZQ calibration supported
• TDQS (Termination Data Strobe) supported (x8 device based only)
• Write Levelization supported
• Auto Self Refresh supported
• 8 bit pre-fetch
• SPD with Integrated TS of Class B